Kyocera FS-1920 - Electrical Parts Layout; Main Frame

2FP/2FY/2FR
2-2-1
2-2-1 Electrical parts layout
(1) Main frame (fuser, laser scanner unit, and controller unit)
Figure 2-2-1 Main frame (1)
1. Main board (KP-1053*
1
/1033*
2
)
2. System DIMM [board] (KP-1059)*
1
3. System DIMM [board] (KP-893)*
2
4. Engine board (KP-1081)
5. Sensor board (KP-1077)
6. LCD controller board (KP-1079)
7. Engine relay board (KP-1071)
8. APC board (KP-1062)
9. Pin photo diode sensor [board] (KP-1075)
10. Fuser board (KP-1069)
11. Power supply unit
12. High voltage unit
13. Registration sensor (PH701)
14. Paper gauge sensor 1 (PH702)
15. Paper gauge sensor 2 (PH703)
16. Top cover/paper transfer unit interlock
switch (SW702)
17. Left cover interlock switch (SW703)
18. Top cover switch (SW701)
19. MP tray paper sensor (PC502)
20. Option feeder sensor (PC501)
21. Paper full sensor
22. Exit sensor
23. Temperature/humidity sensors
24. Power switch
25. Paper size switch
26. Thermistor
27. Thermal cutout
28. Network interface card or serial interface card (Optional)
*
1
: For FS-1920 model
*
2
: For FS-3820N/3830N models
19
11
1
2
5
22
6
8
9
27
7
26
20
25
21
16
15
12
13
14
17
4
28
18
3
10
23
24