Kyocera FS-1920 - Removing the MP Tray Feed Roller; Removing the Retard Holder (Roller)

2FP/2FY/2FR-4
1-6-14
(2) Removing the MP tray feed roller
1. Remove the paper transfer unit. See page 1-6-4.
2. Pull the lever and slide the paper MP feed roller
holder.
3. Remove the MP tray feed roller.
(3) Removing the retard holder (roller)
1. Remove the cassette from the printer.
2. Unlatch the two latches and then remove
the retard guide.
3. Remove the retard holder (roller).
Figure 1-6-13 (a) Removing the MP tray feed roller
Figure 1-6-13 (b) Removing the retard holder (roller)
Lever
MP tray feed roller
Retard guide
Cassette
Latch
Latch
Retard roller
Retard holder
MP feed roller
holder
MP feed roller
holder