Kyocera FS-1920 - Specifications

2FP/2FY/2FR-2
1-1-1
1-1-1 Specifications
FS-1920 model
Type ............................................... Desktop
Printing system .............................. Indirect electrostatic system
Paper type...................................... Cassette: Plain paper (60 - 90 g/m
2
[thick paper mode: 90 - 105 g/m
2
])
MP tray: Plain paper (60 - 90 g/m
2
[thick paper mode: 90 - 200 g/m
2
])
Special paper: Transparencies, letterhead, colored paper, recycled paper
Note: Use the MP tray for special paper
Paper size ...................................... A4 (210 × 297 mm)
B5 (182 × 257 mm)
A5 (148 × 210 mm)
Letter (8
1
/
2
" × 11")
Legal (8
1
/
2
" × 14")
Folio (210 × 330 mm)
Non-standard size (148 to 215.9 mm × 210 to 355.6 mm: cassette),
(148 to 215.9 mm × 210 to 355.6 mm: MP tray)
Printing speed ................................ [Cassette/MP tray ]: 28 pages//min. (A4, plain, 29 pages//min. (Letter, plain)
[Duplexer DU-61]: 27 pages//min. (A4/Letter, plain)
[Paper feeder PF-60]: 28 pages//min. (A4/Letter, plain)
[Sorter SO-60]: 28 pages//min. (A4/Letter, plain)
[Small size paper]: 18 pages/min. (A5, plain), 13 pages/min. (Post card)
First print ........................................ Approx. 9.5 s or less (A4/Letter), EcoFuser [OFF] and Ready, (room temperature
23°C/73.4°F, humidity 60% RH) , depends on input data
Approx. 19.5 s or less (A4/Letter), EcoFuser [ON] or Sleep mode, (room temperature
23°C/73.4°F, humidity 60% RH) , depends on input data
Warm-up time................................. Approx. 10 s or less [from sleep mode]
Approx. 18 s or less [from power on]
Paper feed system ......................... One universal cassette and one MP tray
Paper loading capacity ................... Cassette: 500 sheets (80 g/m
2
, 0.11 µm)
MP tray: 100 sheets (80 g/m
2
, 0.11 µm)
Paper eject system .........................Face down: 250 sheets (80 g/m
2
, 0.11 µm)
Face up: 250 sheets (80 g/m
2
, 0.11 µm)
Face up: 100 sheets (80 g/m
2
, 0.11 µm), Optional paper tray PT-60
Standard memory........................... 32 MB, expandable up to 288 MB
Additional memory ......................... 1 slot (16/32/64/128/256 MB DIMM)
Resolution ...................................... Fast 1200 mode
600 × 600 dpi, with KIR (Kyocera Image Refinement)
300 × 300 dpi, with KIR (Kyocera Image Refinement)
Photoconductor ............................. a-Si (drum diameter 30 mm)
Charging system ............................ Single positive corona charging
Developing system......................... Single element reversing process
Transfer system ............................. Transfer roller
Fixing system ................................. Heat roller
Heat source: Halogen heaters (750 W)
Control temperature: 180°C/356°F (at normal ambient temperature)
Abnormally high temperature protection device: thermal cutout
Charge erasing system .................. Exposure by eraser lamp (LED array)
Cleaning system ............................ Cleaning blade
Controller hardware ....................... CPU: Power PC405 (266 MHz)
System ROM: 4 MB (32 Mbit × 1)
Font ROM: 2 MB (16 Mbit × 1)
Main RAM: 32 MB standard (on-board); expanding up to 288 MB (standard 32 MB +
256 MB) at the maximum by adding optional expansion memory
Optional expansion RAM (DIMM): 1 slot