Kyocera FS-1920 - Remove the Pickup Roller and Feed Roller

2FP/2FY/2FR
1-6-12
5. Remove the feed bracket cover while
unlatching three snaps.
6. Remove the pickup roller and the feed roller.
Figure 1-6-11 Remove the pickup roller and feed roller
CAUTIONS Pickup gear Z32S is installed of the inside the one way clutch. When refitting pickup gear Z32S, face the
one way clutch face to the feed bracket cover.
Feed bracket cover
Snap
Snap
Snap
Pickup gear Z32S
One way
clutch
Pickup roller
Feed roller