Kyocera FS-1920 - Removing the Pickup Roller and Feed Roller; Removing the Feed Roller Assembly

2FP/2FY/2FR
1-6-11
1-6-7 Removing the pickup roller and feed roller
1. Remove the paper transfer unit. See page 1-6-
4.
2. Turn the paper transfer unit over.
3. Detach the release holder by sliding it while
pressing the projections.
4. Remove the feed roller assembly while pressing
it in the direction of arrow (A).
Figure 1-6-10 Removing the feed roller assembly
Projection
Projection
Feed roller
assembly
Release holder
(A)
Paper transfer unit