2FP/2FY/2FR-4
1-4-1
1-4-1 Service mode
The printer is equipped with the service mode that can be accessed in the menu system. The service mode is intended
for use by the service person for maintenance and service for the items explained in the following sections.
(1) Executing service mode
Ready
––– A4 PLAIN
1. Press the MENU key
.
Message display
To print a status page for service purpose.
See page 1-4-2.
2. Press the q or p key several times
until [Others >] is displayed.
Print
Menu Map
>>Print
Status Page
Service mode items
3. Press the u key.
5. Press the u key.
To performing a drum refreshing.
See page 1-4-11.
>>DRUM-CTRL
00
>>Print
Event Log
>>Developer
To performing a automatic drum refreshing.
See page 1-4-11.
To initial setting for the developer.
See page 1-4-10.
To print an event log (EVENT LOG)
(Displayed when FRPO I1 is set to 1)
See page 1-4-6.
To reset the counter after replacing the
maintenance kit.
See page 1-4-9.
>>Maintenance
>>Drum
>MSG Language
English
Others >
4. Press the q or p key several times
until [>Service >] is displayed.
>Service >
To scroll
these items,
press the
q or p key
repeatedly.
To Next Page
Loading...
