Kyocera FS-1920 - Removing the Top Cover;Face-Down Output Tray

2FP/2FY/2FR
1-6-7
(2) Removing the top cover/face-down output tray
1. Open the top cover.
2. Remove two screws.
3. Remove the top cover/face-down output tray
while pressing it the direction arrows (A)
[backwards].
Figure 1-6-6 Removing the top cover/face-down output tray
Screw
Screw
Top cover
Top cover/face-down output tray
(A)
(A)