Connecting and Printing 3-5
Custom Mode
Use Custom Mode if you want to specify the printer port and select
the software to be installed.
For example, if you do not want fonts installed on your computer to
be replaced, select Custom Mode and deselect the Fonts checkbox
in the utility tab.
1 Select Custom Mode.
2 Following the instructions in the install wizard window, select the
software packages to be installed and the specify the port, etc.
For details, refer to Custom Installation in the printer driver operation
manual on the CD-ROM.
Installation on a Macintosh
This section explains how to install the printer driver in Mac OS.
1 Turn on the printer and the Macintosh.
2 Insert the included CD-ROM (Product Library) into the CD-ROM
drive.
3 Double-click the CD-ROM icon.
4 Double-click either OS X 10.2 and 10.3 Only, OS X 10.4 Only or OS
X 10.5 or higher depending on your Mac OS version.
To Next Page
Loading...
