Sending a Fax
2-17
5
Click on the OK button. The Transmit Settings dialog box will be
displayed once again.
(2) Subaddress-Based Communication
NOTE: In order to conduct sub address communication, the other party’s
system also needs to be equipped with sub address communication
functions of the same type.
1
Click on the Option Settings button in the Address Setting tab of the
Transmit Settings dialog box. The Option Settings dialog box will be
displayed.
2
Enter the sub-address and password as it is registered in the destination
fax.
• A maximum of 20 characters can be entered (Entry is allowed for the
characters 0 to 9, #, *, and spaces (a space CANNOT be entered as
the first character.))
3
Click on the OK button. The Transmit Settings dialog box will be
displayed once again.
(3) Cover Page Settings
A Cover Page can be set as the first page of a fax transmission. In addition
to the standard templates for Cover Pages, original templates can be
created and used.
To Next Page
Loading...
