What to do if my Kyocera All in One Printer prints blank sheets?
If your Kyocera All in One Printer is ejecting blank sheets, it might be due to the originals being loaded incorrectly. If using the platen, place the originals face-down and align them with the original size indicator plates. If using the optional document processor, place the originals face-up.
What to do if my Kyocera Printer is not printing?
If your Kyocera printer is not printing, first, ensure the power cord is plugged into an AC outlet and that the main power switch is turned on. Check that the printer cable is securely connected. If the printer cable was connected before powering on the machine, power cycle the printer. Finally, verify that the print job is not paused; if it is, press the Resume key to resume printing.
What to do if my Kyocera Printer printouts are too light?
If your Kyocera printer's printouts are too light, several factors could be the cause. If the machine is in Auto Density mode, set the correct density level. If it's in Manual Density mode, select the correct density level. Shake the toner container from side to side to distribute the toner evenly. If there's a message indicating the need for toner, replace the toner container. Damp paper can also cause light prints, so replace the paper with new paper. Finally, check if EcoPrint mode is enabled and, if so, disable it.
Why does my Kyocera FS-1128MFP All in One Printer keep jamming paper?
If your Kyocera All in One Printer is jamming paper frequently: * Ensure the paper is loaded correctly. * Verify the paper type is supported and in good condition; try turning the stack over. * Replace curled, folded, or wrinkled paper. * Remove any loose scraps or jammed paper from the machine.
Why does my Kyocera FS-1128MFP say 'Cannot duplex print on this paper'?
If your Kyocera All in One Printer displays 'Cannot duplex print on this paper', it means the selected paper size/media type is not duplex printable. Select an available paper type, or press the OK key to print without using Duplex.
What to do if my Kyocera All in One Printer operation panel doesn't respond?
If the operation panel of your Kyocera All in One Printer does not respond when the main power switch is turned on, ensure the power cord is plugged into an AC outlet.
Why my Kyocera FS-1128MFP cannot perform memory reception?
Your Kyocera All in One Printer may be unable to perform memory reception if there is not enough free space in the memory. To resolve this, try to receive after the memory has free space, or create free space in the memory.
How to fix 'Incorrect Login User Name or Password' error on Kyocera FS-1128MFP?
If your Kyocera All in One Printer displays 'Incorrect Login User Name or Password', enter the correct login user name or password.
How to resolve 'Incorrect account ID. Job is canceled' message on Kyocera Printer?
If your Kyocera printer displays the message 'Incorrect account ID. Job is canceled', enter the correct login user name or password.
How to resolve 'Load paper in MP Tray' error on Kyocera Printer?
If your Kyocera printer displays the 'Load paper in MP Tray' message, load the paper in the multi purpose tray which is of the size and type indicated on the Message Display.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Printing colors | Black |
| Maximum duty cycle | 20000 pages per month |
| Page description languages | PCL 5e, PCL 6, PCL XL |
| Scan to | FTP |
| Grayscale levels | 256 |
| Image formats supported | JPG, TIF |
| Optical scanning resolution | - DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 999 copies |
| Time to first copy (black, normal) | 6.9 s |
| Faxing | Mono faxing |
| Fax memory | 100 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MMR (Fax coding method), MR |
| Fax transmission speed | 3 sec/page |
| Total input capacity | - sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 800 sheets |
| Internal memory | 256 MB |
| Processor model | 440 |
| Processor family | PowerPC |
| Maximum internal memory | 768 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (copying) | 52 dB |
| Custom media sizes | 105 x 148mm/216 x 356mm |
| Dimensions (WxDxH) | 494 x 410 x 366 mm |
| Power requirements | AC 220 - 240 V, 50/60Hz |
| All-in-one functions | Copy, Fax, Scan |
| Color all-in-one functions | scan, n |
| Compatible operating systems | Windows 2000/XP/Server 2000/Server 2003/ Vista/Server 2008, MAC OS 9.X, MAC OS X, Linux |
| Maximum print size | 216 x 356 mm |
| Duplex media weight | 60 - 105 g/m² |
| Paper tray media types | Envelopes |
| Paper tray media weight | 60 - 120 g/m² |
| Non-ISO print media sizes | Folio |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Power consumption (standby) | 91 W |
| Power consumption (PowerSave) | 10.2 W |
| Power consumption (average operating) | 494 W |
| Certification | TÜV/GS, CE |
| Display | - |
| Market positioning | Business |
| Supported network protocols (IPv6) | SNMPv3, SSL, IPsec |
| Sustainability certificates | ENERGY STAR |
| Harmonized System (HS) code | 84433100 |
To Next Page
