Preparation Before Use
2-4 OPERATION GUIDE
Setting the TTI information
Register the name (local FAX name), fax number, and local FAX ID printed in the transmit terminal identification
(TTI) area.
By registering the TTI data, the receiver can easily find out where the FAX came from.
Local FAX Name Registration
Register the local FAX name printed on in the transmit terminal identification.
NOTE: To change the entry, follow the same operation.
1 Press the System Menu/Counter key.
2 Press the U or V key to select [FAX].
3 Press the OK key.
4 Press the U or V key to select [Transmission].
5 Press the OK key.
6 Press the U or V key to select [Local FAX Name].
7 Press the OK key.
8 Enter the Local FAX Name to be registered. Up to
32 characters can be entered.
NOTE: For details on character entry, refer to
Specifications (Fax function) on Appendix-6.
9 Press the OK key.
Local FAX Information Entry
Register the local FAX information (local FAX number/ID) printed on in the transmit terminal identification (TTI)
area. The Local FAX ID is used for transmission limit purposes. (Refer to Transmission Restriction on page 6-
15.)
1 Press the System Menu/Counter key.
2 Press the U or V key to select [FAX].
3 Press the OK key.
4 Press the U or V key to select [Transmission].
To Next Page
Loading...
