Kyocera FS-1128MFP - Media Type for Print Output

Setup and Registration
OPERATION GUIDE 6-11
6
Media Type for Print Output
Specify the paper type to be used for print output of the received fax.
Supported paper types: All Media Type, Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted,
Bond, Cardstock, Color, Prepunched, Letterhead, Envelope, Thick, High Quality, Custom 1 to 8
NOTE: Refer to the machine’s Operation Guide for details on Custom Paper 1 to 8.
1 Press the System Menu/Counter key.
2 Press the U or V key to select [FAX].
3 Press the OK key.
4 Press the U or V key to select [Reception].
5 Press the OK key.
6 Press the U or V key to select [FAX Media Type].
7 Press the OK key.
8 Press the U or V key to select the desired paper
type. If you do not specify any paper type, select
[All Media Type].
9 Press the OK key.
Setting the cassette for the print output of received faxes
By specifying the media type, faxes can be received on the corresponding cassette. Faxes will be automatically
reduced to the set paper size.
1 Press the System Menu/Counter key.
2 Press the U or V key to select [Common Settings].
3 Press the OK key.
4 Press the U or V key to select [Orig./Paper Set.].
5 Press the OK key.
6 Press the U or V key to select [Cassette 1 Set.],
[Cassette 2 Set.] or [Cassette 3 Set.].
NOTE: [Cassette 2] and [Cassette 3] are shown when
the optional paper feeder is installed.
FAX Media Type: a b
*********************
2 Plain
3 Transparency
1 *All Media Type