Setup and Registration
OPERATION GUIDE 6-29
6
9 Press the U or V key to select the desired
encryption key number.
10 Press the OK key.
11 Press the U or V key to select [On] or [Off].
NOTE: When the machine receives originals, the
encryption box is not used.
12 Press the OK key. Proceed to the next step or step
15 when [On] or [Off] is selected in step 11,
respectively.
13 Use the numeric keys to enter the box number
(0000 to 9999).
14 Press the OK key.
15
Press the Start key. The transmission will start.
Operation at the Receiving System
To conduct encryption communication operating the receiving system, follow the steps below.
NOTE: In encryption communication, sub address communication cannot be used.
1 Register the encryption key you have arranged with
the sending system. (Refer to Registering an
Encryption Key on page 6-26.)
2 Press the System Menu/Counter key.
3 Press the U or V key to select [FAX].
4 Press the OK key.
5 Press the U or V key to select [Reception].
6 Press the OK key.
To Next Page
Loading...
