Setup and Registration
6-18 OPERATION GUIDE
6 Use the numeric keys to reenter the Permit FAX
number. Up to 32 digits can be entered.
NOTE: Press the Address Recall/Pause key to insert
a pause (-) between two digits.
Press the Y or Z key to move the cursor.
To correct the number, press the Clear key to delete the
digits one by one before reentering the number. To
delete the number entirely, press the Reset key.
7 Press the OK key. Proceed to step 12.
8 Press [Menu] (the Right Select key).
9 Press the U or V key to select [Delete].
10 Press the OK key.
11 Press [Yes] (the Left Select key). This deletes the
Permit FAX number.
12 To change or delete other Permit FAX numbers,
repeat steps 2 to 11.
Registering Reject FAX No.
NOTE: Up to 10 Reject FAX numbers can be registered.
1 Press the System Menu/Counter key.
2 Press the U or V key to select [FAX].
3 Press the OK key.
4 Press the U or V key to select [TX/RX Restrict.].
5 Press the OK key.
6 Press the U or V key to select [Reject No. List].
7 Press the OK key.
To Next Page
Loading...
