Kyocera FS-1128MFP - Fax Rx Result Reports

Checking Transmission Results and Registration Status
5-6 OPERATION GUIDE
FAX RX Result Reports
Each time you receive a fax, you can print a report to confirm whether the fax was received successfully.
NOTE: Fax receipt can also be notified by e-mail instead of checking the receipt result report. (Refer to
Reporting FAX Receipt Result by E-mail on page 5-10.)
1 Press the System Menu/Counter key.
2 Press the U or V key to select [Report].
3 Press the OK key.
4 Press the U or V key to select [Result Rpt Set.].
5 Press the OK key.
6 Press the U or V key to select [FAX RX Result].
7 Press the OK key.
8 Press the U or V key to select [Off] (not to print),
[On] (to print) or [Error/SubAddress].
Send Result Report
Completed
With transmitted image
Completed
Send Result Report
Without transmitted image
FAX RX Result: a b
*********************
2 On
3 Error/SubAddress
1 *Off