Setup and Registration
6-26 OPERATION GUIDE
Registering an Encryption Key
An encryption key is required when registering the Address Book used for encryption communication (the other
party is directly entered using the numeric keys) in the sending system and when setting encryption in the
receiving system.
For the creation of the encryption key, numbers from 0 to 9 and letters from A to F are arranged to form 16
numbers and/or letters arbitrarily.
NOTE: Up to 20 encryption keys can be registered.
1 Press the System Menu/Counter key.
2 Press the U or V key to select [FAX].
3 Press the OK key.
4 Press the U or V key to select [TX/RX Common].
5 Press the OK key.
6 Press the U or V key to select [Encryption Key].
7 Press the OK key.
8 Press the U or V key to select an unregistered
encryption key, and then press [Menu] (the Right
Select key).
9 Press the U or V key to select [Register].
NOTE: Refer to Character Entry Method on Appendix-
2 for details on entering characters.
10 Press the OK key.
11 Use the numeric keys to enter the encryption key.
Up to 16 digits can be entered.
12 Press the OK key.
13 Repeat steps 8 to 12 to register other encryption
keys.
To Next Page
Loading...
