Using Cover Pages
3-2
Attaching and Transmitting a Cover Page
The procedure for attaching and transmitting a Cover Page is shown
below.
1
Perform Steps 1 to 7 of the Basic Transmission method given on page 2-
5 to display the Transmit Settings dialog box.
When selecting the destination from an Address Book, refer to (1)
Selecting a Destination from the Address Book on page 2-15, select
the destination, and go to Step 5.
2
In the Address Setting tab, enter the destination fax number and click on
the Option Settings button.
NOTE: For Internet fax transmission, select Internet FAX in the
Transmission Mode and enter the Internet fax address.
1 FAX Number: A maximum of 64 characters can be entered.
Internet FAX Address: A maximum of 128 characters can be
entered.
3
Enter the recipient information and click on the OK button.
2 Company: A maximum of 32 characters can be entered.
3 Department: A maximum of 32 characters can be entered.
4 Recipient: A maximum of 32 characters can be entered.
To Next Page
Loading...
