Installing the Corresponding Software
1-2
4
Click on Install Software.
5
On the Installation Method page, select Custom Mode.
6
The Discover Printing System page appears displaying Discover
selected. You can use this option, or the Custom select option.
With the Discover option, you can let the system find all the devices avail-
able for driver installation. If you use this option, proceed to step 7.
With the Custom select option, you can choose the printing system and
printer port to install. Select the Custom select and click on the Next but-
ton. Proceed to step 9.
If Discover does not find your machine, a message appears. Ensure that
your machine is properly connected by the correct cable and is turned on,
and then close the message box. Remove and reinsert the cable to your
computer and retry the discovery. Contact your system administrator if the
system cannot find your machine.
To Next Page
Loading...
