What to do if my Kyocera FS-1128MFP All in One Printer displays 'Job Accounting restriction exceeded.'?
If your Kyocera All in One Printer displays 'Job Accounting restriction exceeded', it means the number of papers used has exceeded the limit preset by Job Accounting. Press the OK key to cancel the job. Try the job again after resetting the limit for paper use.
Why my Kyocera All in One Printer cannot receive document?
Your Kyocera All in One Printer might fail to receive documents due to these reasons: * The modular cord may not be connected correctly. Ensure the modular cord is correctly connected. * A communication error might be displayed. Remedy the cause of the error and ask the sender to retry. * The RX (reception) restriction might be activated. Cancel the RX restriction.
Why my Kyocera All in One Printer cannot send document?
Your Kyocera All in One Printer might fail to send documents due to several reasons: * The modular cord may not be connected correctly. Ensure it is properly connected. * A communication error might be displayed. Address the cause of the error and try sending again. * The TX (transmission) restriction might be activated. Cancel the TX restriction and try again.
How to resolve 'Top tray is full of Paper. Remove the paper' message on Kyocera Printer?
If your Kyocera printer displays the message 'Top tray is full of Paper. Remove the paper', remove paper from the top tray, and press the OK key to resume the job.
Why my Kyocera FS-1128MFP All in One Printer cannot perform encrypted communication?
If your Kyocera All in One Printer cannot perform encrypted communication, double-check the registrations both at the sender and recipient ends to ensure they are correct.
How to fix fuzzy printouts from Kyocera Printer?
If your Kyocera printer produces fuzzy printouts, and the machine is being used in very humid conditions, clean the charger wire.
How to resolve 'Add toner' message on Kyocera Printer?
If your Kyocera printer displays the 'Add toner' message, replace the toner container.
How to resolve 'Load paper in cassette 1' error on Kyocera Printer?
If your Kyocera printer displays the 'Load paper in cassette 1' message, it means the indicated cassette is out of paper. Simply load paper into the cassette.
How to fix vertical streaks on Kyocera Printer prints?
If you are seeing vertical streaks on your Kyocera printer prints, the inside of the machine may be dirty. Check the toner container and replace it if necessary. Also, clean the charger wire. Ensure that the main charger cleaner of the drum unit is in its original position.
What to do if my Kyocera Printer printouts are too dark?
If your Kyocera printer's printouts are too dark, it could be due to the density settings. If the machine is in Auto Density mode, set the correct density level. If the machine is in Manual Density mode, select the correct density level.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Printing colors | Black |
| Maximum duty cycle | 20000 pages per month |
| Page description languages | PCL 5e, PCL 6, PCL XL |
| Scan to | FTP |
| Grayscale levels | 256 |
| Image formats supported | JPG, TIF |
| Optical scanning resolution | - DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 999 copies |
| Time to first copy (black, normal) | 6.9 s |
| Faxing | Mono faxing |
| Fax memory | 100 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MMR (Fax coding method), MR |
| Fax transmission speed | 3 sec/page |
| Total input capacity | - sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 800 sheets |
| Internal memory | 256 MB |
| Processor model | 440 |
| Processor family | PowerPC |
| Maximum internal memory | 768 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (copying) | 52 dB |
| Custom media sizes | 105 x 148mm/216 x 356mm |
| Dimensions (WxDxH) | 494 x 410 x 366 mm |
| Power requirements | AC 220 - 240 V, 50/60Hz |
| All-in-one functions | Copy, Fax, Scan |
| Color all-in-one functions | scan, n |
| Compatible operating systems | Windows 2000/XP/Server 2000/Server 2003/ Vista/Server 2008, MAC OS 9.X, MAC OS X, Linux |
| Maximum print size | 216 x 356 mm |
| Duplex media weight | 60 - 105 g/m² |
| Paper tray media types | Envelopes |
| Paper tray media weight | 60 - 120 g/m² |
| Non-ISO print media sizes | Folio |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Power consumption (standby) | 91 W |
| Power consumption (PowerSave) | 10.2 W |
| Power consumption (average operating) | 494 W |
| Certification | TÜV/GS, CE |
| Display | - |
| Market positioning | Business |
| Supported network protocols (IPv6) | SNMPv3, SSL, IPsec |
| Sustainability certificates | ENERGY STAR |
| Harmonized System (HS) code | 84433100 |
Explanation of symbols and warning levels (DANGER, WARNING, CAUTION).
Safety measures during installation.
Safety measures during maintenance procedures.
Recommended conditions for installation and operation.
Instructions on how to enter and operate maintenance mode.
Overview of the management mode for user settings.
List of maintenance functions, their contents, and initial settings.
Information on detecting and indicating paper misfeeds.
How the machine performs self-diagnosis and displays errors.
Overview of common image formation issues.
Troubleshooting electrical issues with the machine.
Troubleshooting common mechanical issues.
Explanation of error code structure and indications.
Error codes related to sending functions (SMB, FTP, E-mail, Twain).
General precautions before disassembling or assembling parts.
To Next Page
