How to fix dirty printouts from Kyocera Printer?
If your Kyocera printer produces dirty printouts, the platen or document processor may be dirty, so clean them. Also, the charger wire could be dirty, so ensure you clean that as well.
What to do if my Kyocera Printer printouts are too light?
If your Kyocera printer's printouts are too light, several factors could be the cause. If the machine is in Auto Density mode, set the correct density level. If it's in Manual Density mode, select the correct density level. Shake the toner container from side to side to distribute the toner evenly. If there's a message indicating the need for toner, replace the toner container. Damp paper can also cause light prints, so replace the paper with new paper. Finally, check if EcoPrint mode is enabled and, if so, disable it.
What to do if my Kyocera Printer is not printing?
If your Kyocera printer is not printing, first, ensure the power cord is plugged into an AC outlet and that the main power switch is turned on. Check that the printer cable is securely connected. If the printer cable was connected before powering on the machine, power cycle the printer. Finally, verify that the print job is not paused; if it is, press the Resume key to resume printing.
How to fix light printouts on my Kyocera FS-1128MFP All in One Printer?
Light printouts from your Kyocera All in One Printer can be caused by several factors: * If the machine is in Auto Density mode, set the correct density level. * If in Manual Density mode, select the appropriate density level. * The toner may not be evenly distributed; shake the toner container from side to side several times. * You may need to replace the toner container if a message indicates it. * The paper could be damp; replace it with new paper. * EcoPrint mode might be enabled; disable EcoPrint mode.
What to do if my Kyocera All in One Printer copies are not clear?
If your Kyocera All in One Printer copies are not clear, select an appropriate image quality.
What to do if my Kyocera All in One Printer operation panel doesn't respond?
If the operation panel of your Kyocera All in One Printer does not respond when the main power switch is turned on, ensure the power cord is plugged into an AC outlet.
What causes moire patterns on copies from my Kyocera All in One Printer?
If your copies from Kyocera All in One Printer have a moire pattern, it's likely because the original is a printed photograph. Set the image quality to [Photo].
How to resolve fuzzy printouts on my Kyocera FS-1128MFP All in One Printer?
Fuzzy printouts from your Kyocera All in One Printer may occur if the machine is used in very humid conditions. Clean the charger wire.
Why are my Kyocera FS-1128MFP images skewed?
Skewed images from your Kyocera All in One Printer can occur if the originals are not placed correctly. When using the platen, align them with the original size indicator plates. Also, check the position of the paper width guides to ensure the paper is loaded correctly.
How to fix wrinkled printouts from Kyocera FS-1128MFP?
Wrinkled printouts from your Kyocera All in One Printer may be due to damp paper; replace it with new paper. Alternatively, the paper may be positioned in the wrong orientation; change the orientation.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Printing colors | Black |
| Maximum duty cycle | 20000 pages per month |
| Page description languages | PCL 5e, PCL 6, PCL XL |
| Scan to | FTP |
| Grayscale levels | 256 |
| Image formats supported | JPG, TIF |
| Optical scanning resolution | - DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 999 copies |
| Time to first copy (black, normal) | 6.9 s |
| Faxing | Mono faxing |
| Fax memory | 100 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MMR (Fax coding method), MR |
| Fax transmission speed | 3 sec/page |
| Total input capacity | - sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 800 sheets |
| Internal memory | 256 MB |
| Processor model | 440 |
| Processor family | PowerPC |
| Maximum internal memory | 768 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (copying) | 52 dB |
| Custom media sizes | 105 x 148mm/216 x 356mm |
| Dimensions (WxDxH) | 494 x 410 x 366 mm |
| Power requirements | AC 220 - 240 V, 50/60Hz |
| All-in-one functions | Copy, Fax, Scan |
| Color all-in-one functions | scan, n |
| Compatible operating systems | Windows 2000/XP/Server 2000/Server 2003/ Vista/Server 2008, MAC OS 9.X, MAC OS X, Linux |
| Maximum print size | 216 x 356 mm |
| Duplex media weight | 60 - 105 g/m² |
| Paper tray media types | Envelopes |
| Paper tray media weight | 60 - 120 g/m² |
| Non-ISO print media sizes | Folio |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Power consumption (standby) | 91 W |
| Power consumption (PowerSave) | 10.2 W |
| Power consumption (average operating) | 494 W |
| Certification | TÜV/GS, CE |
| Display | - |
| Market positioning | Business |
| Supported network protocols (IPv6) | SNMPv3, SSL, IPsec |
| Sustainability certificates | ENERGY STAR |
| Harmonized System (HS) code | 84433100 |
Explanation of symbols and warning levels (DANGER, WARNING, CAUTION).
Safety measures during installation.
Safety measures during maintenance procedures.
Recommended conditions for installation and operation.
Instructions on how to enter and operate maintenance mode.
Overview of the management mode for user settings.
List of maintenance functions, their contents, and initial settings.
Information on detecting and indicating paper misfeeds.
How the machine performs self-diagnosis and displays errors.
Overview of common image formation issues.
Troubleshooting electrical issues with the machine.
Troubleshooting common mechanical issues.
Explanation of error code structure and indications.
Error codes related to sending functions (SMB, FTP, E-mail, Twain).
General precautions before disassembling or assembling parts.
To Next Page
