What to do if Kyocera Printer says 'Close front cover'?
If your Kyocera Printer displays a 'Close front cover' message, check for any open covers and close the cover indicated on the operation panel.
What to do if my Kyocera Printer cannot print?
If your Kyocera Printer isn't printing, first ensure that the power cord is plugged into an AC outlet and the power switch is turned on. Check that the printer cable is securely connected and that the machine was powered on after connecting the cable. If the print job is paused, press the Resume key. Finally, if an error message is displayed, follow the corresponding procedure.
How to clean Kyocera Printer dirty printouts?
If your Kyocera Printer produces dirty printouts, the platen or document processor might be dirty. Clean the platen or the document processor to resolve this issue.
What to do if Kyocera Printer ejects blank sheets?
If your Kyocera Printer is ejecting blank sheets, make sure the originals are loaded correctly. When using the platen, place originals face-down and aligned with the slit glass. When using the document processor, place originals face-up.
What to do if my Kyocera Printer says paper jammed?
If a paper jam occurs in your Kyocera printer, the machine will stop, and the location of the jam will be indicated on the Message Display. Leave the machine on and follow the instruction to remove the jammed paper.
What to do if Kyocera Printer says 'Add toner'?
If the 'Add toner' message is displayed on your Kyocera Printer and accompanied by a lit attention LED, replace the toner container.
How to fix Kyocera Printer cannot feed originals?
If your Kyocera Printer cannot feed originals, when placing originals in the document processor, align the original width guides securely before placing the originals.
How to fix improperly printed documents on Kyocera Printer?
If documents are printed improperly by your Kyocera Printer, check that the printing system driver and application software settings are set properly on your PC.
Why is there 'No print output after reception' on my Kyocera FS-1130MFP All in One Printer?
If there's no print output after reception, check if memory forwarding is activated and verify the forwarding destination.
What to do if my Kyocera FS-1130MFP displays 'Cannot receive document.'?
Check that the modular cord is correctly connected. If a communication error is displayed, resolve the error and ask the sender to resend the document. Also, make sure that RX (reception) restriction is not activated; if it is, cancel the RX restriction.
General| Media thickness | 0.11 mm |
|---|---|
| Dimensions (WxDxH) | 494 x 430 x 448 mm |
| Energy saving mode | Yes |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | Scan |
| Recommended monthly print volume | 2.000 pages |
| Print technology | Laser |
| Maximum resolution | 1800 x 600 DPI |
| Time to first page (black, normal) | 6 s |
| Print speed (black, normal quality, A4/US Letter) | 30 ppm |
| Digital sender | No |
| Maximum duty cycle | 20000 pages per month |
| Number of print cartridges | 1 |
| Page description languages | PCL 5e, PCL 6, PCL XL, PostScript 3 |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 999 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 6.9 s |
| Copy speed (black, normal quality, A4) | 30 cpm |
| Grayscale levels | 256 |
| Maximum scan area | A4 / Letter (216 x 297) mm |
| Scan speed (black) | 35 ppm |
| Scan speed (color) | 14 ppm |
| Image formats supported | JPG, TIF |
| Faxing | Mono faxing |
| Fax memory | 256 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Fax transmission speed | 2.5 sec/page |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 800 sheets |
| Maximum number of input trays | 3 |
| Multi-Purpose tray input capacity | 50 sheets |
| Custom media width | 70 - 216 mm |
| Maximum print size | 216 x 356 mm |
| Custom media length | 148 - 356 mm |
| Duplex media weight | 60 - 105 g/m² |
| Paper tray media types | Envelopes, Plain paper |
| Paper tray media weight | 60 - 120 g/m² |
| Non-ISO print media sizes | Folio |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Auto Document Feeder (ADF) media weight | 50 - 120 g/m² |
| Display | LCD |
| Product color | Grey, White |
| Market positioning | Business |
| Display number of lines | 5 lines |
| Standard interfaces | Ethernet, USB 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Processor family | PowerPC |
| Maximum internal memory | 768 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (copying) | 54 dB |
| Sound pressure level (quiet mode) | 49 dB |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 0.5 W |
| Power consumption (standby) | 83 W |
| Power consumption (PowerSave) | 10.6 W |
| Power consumption (average operating) | 482 W |
| Energy Star Typical Electricity Consumption (TEC) | 3.1 kWh/week |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
| Certification | TÜV / GS, CE |
| Sustainability certificates | Blue Angel, RoHS, ENERGY STAR |
Weight and Dimensions| Depth | 430 mm |
|---|---|
| Width | 494 mm |
| Height | 448 mm |
To Next Page
