2MH/2MJ/2MK/2ML
2-1-5
(2) Main charger unit
As the drum rotates in a “clean (neutral)” state, its photoconductive layer is given a uniform, positive (+)
corona charge dispersed by the main charger wire. Due to high-voltage scorotron charging, the charging wire
can get contaminated by oxidization after a long run. Therefore, the charger wire must be cleaned at a specific
interval. Cleaning the charging wire prevents print quality problems such as black streaks.
Figure 2-1-8 Main charger unit
Figure 2-1-9 Drum unit and main charger unit block diagram
To Next Page
Loading...
