D
Debra WilsonSep 3, 2025
How to remove moire pattern from Kyocera Printer copies?
- DDonald CherrySep 4, 2025
If copies from your Kyocera Printer have a moire pattern, and the original is a printed photograph, set the image quality to [Photo].
How to remove moire pattern from Kyocera Printer copies?
If copies from your Kyocera Printer have a moire pattern, and the original is a printed photograph, set the image quality to [Photo].
What to do if pressing Start key on Kyocera Printer does not produce copies?
If pressing the Start key on your Kyocera Printer does not produce copies, check the Message Display for any messages and respond accordingly. Also, check if the machine is in Sleep mode; if so, press any key on the operation panel to recover the machine. It will be ready to copy within 15 seconds.
Why are Kyocera Printer printouts wrinkled?
If the printouts from your Kyocera Printer are wrinkled or curled, the paper might be damp. Replace the paper with new paper.
Why does my Kyocera Printer paper often jam?
Paper jams in your Kyocera Printer can occur due to several reasons. Ensure the paper is loaded correctly. If it is a supported type and in good condition, try removing it, turning it over, and reloading it. Replace any curled, folded, or wrinkled paper with new paper. Also, check for and remove any loose scraps or jammed paper inside the machine.
Why is there 'No print output after reception' on my Kyocera FS-1130MFP All in One Printer?
If there's no print output after reception, check if memory forwarding is activated and verify the forwarding destination.
What to do if my Kyocera FS-1130MFP All in One Printer displays 'Job Accounting restriction exceeded.'?
This message appears when the number of pages used has exceeded the limit set in Job Accounting. Press the OK key to cancel the current job. To proceed, reset the limit for paper use in the Job Accounting settings and try the job again.
What to do if my Kyocera FS-1130MFP displays 'Cannot receive document.'?
Check that the modular cord is correctly connected. If a communication error is displayed, resolve the error and ask the sender to resend the document. Also, make sure that RX (reception) restriction is not activated; if it is, cancel the RX restriction.
What to do if my Kyocera FS-1130MFP displays 'Cannot send document.'?
First, check if the modular cord is correctly connected. If a 'Communication error' is displayed, address the cause of the error and try sending again. Also, verify whether the TX (transmission) restriction is activated and, if so, cancel it.
How to fix Kyocera Printer operation panel not responding?
If the operation panel of your Kyocera Printer does not respond when the power switch is turned on, ensure that the power cord is plugged into an AC outlet.
How to adjust darkness on Kyocera Printer printouts?
If the printouts from your Kyocera Printer are too dark, check if the machine is in Auto Density mode and set the correct density level. Also, verify if the machine is in Manual Density mode and select the correct density level.
Media thickness | 0.11 mm |
---|---|
Dimensions (WxDxH) | 494 x 430 x 448 mm |
Energy saving mode | Yes |
All-in-one functions | Copy, Fax, Print, Scan |
Color all-in-one functions | Scan |
Recommended monthly print volume | 2.000 pages |
Print technology | Laser |
Maximum resolution | 1800 x 600 DPI |
Time to first page (black, normal) | 6 s |
Print speed (black, normal quality, A4/US Letter) | 30 ppm |
Digital sender | No |
Maximum duty cycle | 20000 pages per month |
Number of print cartridges | 1 |
Page description languages | PCL 5e, PCL 6, PCL XL, PostScript 3 |
Copier resize | 25 - 400 % |
Maximum copy resolution | 600 x 600 DPI |
Maximum number of copies | 999 copies |
N-in-1 copy function (N=) | 2, 4 |
Time to first copy (black, normal) | 6.9 s |
Copy speed (black, normal quality, A4) | 30 cpm |
Grayscale levels | 256 |
Maximum scan area | A4 / Letter (216 x 297) mm |
Scan speed (black) | 35 ppm |
Scan speed (color) | 14 ppm |
Image formats supported | JPG, TIF |
Faxing | Mono faxing |
Fax memory | 256 pages |
Modem speed | 33.6 Kbit/s |
Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
Fax transmission speed | 2.5 sec/page |
Total input capacity | 250 sheets |
Total output capacity | 150 sheets |
Maximum input capacity | 800 sheets |
Maximum number of input trays | 3 |
Multi-Purpose tray input capacity | 50 sheets |
Custom media width | 70 - 216 mm |
Maximum print size | 216 x 356 mm |
Custom media length | 148 - 356 mm |
Duplex media weight | 60 - 105 g/m² |
Paper tray media types | Envelopes, Plain paper |
Paper tray media weight | 60 - 120 g/m² |
Non-ISO print media sizes | Folio |
ISO A-series sizes (A0...A9) | A4, A5, A6 |
ISO B-series sizes (B0...B9) | B5 |
Maximum ISO A-series paper size | A4 |
Multi-Purpose Tray media weight | 60 - 220 g/m² |
Auto Document Feeder (ADF) media weight | 50 - 120 g/m² |
Display | LCD |
Product color | Grey, White |
Market positioning | Business |
Display number of lines | 5 lines |
Standard interfaces | Ethernet, USB 2.0 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Processor family | PowerPC |
Maximum internal memory | 768 MB |
Sound power level (standby) | 30 dB |
Sound pressure level (copying) | 54 dB |
Sound pressure level (quiet mode) | 49 dB |
AC input voltage | 220 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (off) | 0.5 W |
Power consumption (standby) | 83 W |
Power consumption (PowerSave) | 10.6 W |
Power consumption (average operating) | 482 W |
Energy Star Typical Electricity Consumption (TEC) | 3.1 kWh/week |
Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
Certification | TÜV / GS, CE |
Sustainability certificates | Blue Angel, RoHS, ENERGY STAR |
Depth | 430 mm |
---|---|
Width | 494 mm |
Height | 448 mm |