Why does my Kyocera FS-1350DN Printer say 'Load MP Tray'?
The 'Load MP Tray (A4)/(PLAIN)' message on your Kyocera printer indicates that there is no paper cassette installed in the printer that matches the paper size and paper type of the print job. Set paper in the MP tray and press [GO] to resume printing.
How to fix printing that is incomplete or out of position on Kyocera FS-1350DN?
To address incomplete or out-of-position printing on your Kyocera printer, verify that the printing settings are correct in both the application software and the printer driver. Also, determine whether the problem is due to a PRESCRIBE command error. If it occurs only with a specific file or program, the most likely cause is an error in a parameter to a command or command syntax.
What to do if my Kyocera FS-1350DN Printer says 'Clean printer'?
Please clean the inside of the printer. After cleaning the inside of the printer, press [GO] and the printer will be ready for printing.
What to do if my Kyocera FS-1350DN says 'Replace toner Clean printer'?
The message 'Replace toner Clean printer' means that the toner has run out in the toner container. Replace the toner container using a new toner kit. The printer will not operate when this message is displayed.
What to do if my Kyocera Printer displays 'Cassette # not loaded'?
The message 'Cassette # not loaded' means that the corresponding paper cassette is not installed. Install the cassette. The cassette number can be 1 (topmost) to 4 (bottom).
What to do if my Kyocera FS-1350DN says 'Close top cover'?
The message 'Close top cover' appears because the top cover of the printer is open. Close the printer top cover.
What to do if my Kyocera FS-1350DN displays 'Memory overflow Press GO'?
The message 'Memory overflow Press GO' means that the total amount of data received by the printer exceeds the printer’s internal memory. Try adding more memory.
What to do if my Kyocera FS-1350DN Printer says 'No multi copies Press GO'?
The message 'No multi copies Press GO' means that multiple copies cannot be printed because the RAM disk is disabled or the hard disk is not installed. There is no available RAM disk or hard disk space, so delete unnecessary files.
What to do if my Kyocera FS-1350DN Printer displays 'MemoryCard err20'?
The message 'MemoryCard err20' means that the CompactFlash (CF) card is accidentally inserted and removed from the printer’s slot while the printer is on. Turn the power switch off and then back on again.
Why is my Kyocera FS-1350DN Printer printing a status page but not data from the computer?
The printer might print a status page, but data from the computer isn't being printed because of program files and application software issues or interface cable problems. Try printing another file or using another print command. If the problem occurs with a specific file or application, check the printer settings for that application. Also, connect both ends of the interface cable securely and try replacing the printer cable.
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6 s |
| Print speed (black, normal quality, A4/US Letter) | 30 ppm |
| Processor model | PowerPC–440F5 |
| Maximum internal memory | 1152 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 54 dB |
| Power supply type | AC 220 - 240 V, 50/60 Hz |
| Capacity cartridge | 7200 sheets |
| Standard media sizes | (105 x 148 - 216 x 297 mm) |
| Power consumption (active) | 484 W |
| Compliance industry standards | TUV/GS, CE |
| Number of print cartridges | 1 |
| Total input capacity | 250 sheets |
| Maximum input capacity | 800 sheets |
| Maximum print size | 216 x 356 mm |
| Non-ISO print media sizes | Folio (media size), Letter (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Power consumption (standby) | 12 W |
| Power consumption (PowerSave) | 7.1 W |
| Display | LCD |
Weight and Dimensions| Dimensions (WxDxH) | 375 x 393 x 267 mm |
|---|
Details the printer's operation panel, including its display, keys, and indicators.
Offers guidelines on choosing paper based on condition, composition, size, and smoothness for best results.
Details how to configure TCP/IP, TCP/IP (IPv6), and other network settings.
Guides users through installing the printer driver on Windows and Mac OS.
Detailed steps for replacing the toner container to maintain print quality.
Details various print quality issues and their corresponding corrective actions.
Lists common error messages and provides corrective actions for self-resolution.
Step-by-step instructions for removing paper jams from different printer locations.
Provides instructions for setting up TCP/IP (IPv4) and TCP/IP (IPv6) network parameters.
Details how to set administrator ID, password, and interface blocking for security.
Guides users on changing administrator ID and password for system management.
To Next Page
