Kyocera FS-1700 - 3-Close the Top Cover; 4-Install the Waste Toner Bottle

1.4. Setting Up and Interfacing
1-9
5. When the toner container is installed correctly
on the developer, push the top of the con-
tainer unit ("PUSH HERE") until it locks in.
☛ Make sure that the toner container is
properly locked in the printer.
3—Close the Top Cover
Close the top cover by pressing the arrowed part in
this diagram.
4—Install the Waste Toner Bottle
The waste toner bottle is in the toner kit supplied with the printer. The waste toner bottle must be
installed in the printer.
Install the waste toner bottle in the printer as follows.
1. Take the waste toner bottle from the toner kit
supplied.
☛ Do not cap the waste toner bottle.
Top Cover
Top Cover
Cap
Waste Toner
Bottle