Kyocera FS-1700 - 6-Open the Paper Stopper on the Face-Down Output Tray; 7-Install the Face-Up Output Tray (if Required)

1.4. Setting Up and Interfacing
1-12
6—Open the Paper Stopper on the Face-down Output Tray
Open the paper stopper as shown right.
7—Install the Face-up Output Tray (if required)
☛ This face-up output tray is a separate option (PT-4) with the FS-1700+.
If you want the printed pages stacked face-up (in reverse order), mount the face-up output tray as
follows.
Depending on the size of the paper you use, mount the paper stopper on the face-up output tray
as shown below.
Paper Stopper
Legal Size
A4 Size
Letter Size
Paper Stopper
Face-up Output
Tray