Kyocera FS-3040MFP - Page 374

11-12
Management
7 Press the OK key. Group Auth. appears.
8 Press the U or V key to select [On] or [Off].
9 Press the OK key.
Completed. is displayed and the screen returns to the
User/Job Account menu.
Displaying Network User Propertiy
Use the procedure below to display the property of the user logged on using the network authentication. This menu
can be used only when [Netwk Authentic.] is selected as the user authentication method.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 Press the System Menu/Counter key on the main unit
operation panel.
2 In the Sys. Menu/Count. menu, press the U or V key to
select [User/Job Account].
If user login administration is disabled, the user
authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you
need to log in with administrator privileges. Refer to
Adding a User on page 11-6 for the default login user
name and password.
3 Press the OK key. The User/Job Account menu appears.
4 Press the U or V key to select [User Login Set.].
Group Auth.: a b
*********************
2 On
1 *Off
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
4 User/Job Account
Login User Name L b
*******************
Login Password:
[ Login ]
User/Job Account: a b
*********************
2 Job Account. Set.
3 Unknown ID Job
[ Exit ]
1 User Login Set.
Downloaded From ManualsPrinter.com Manuals