Kyocera FS-3040MFP

Other manuals for Kyocera FS-3040MFP

Service Manual273 pages

User Guide89 pages

Quick Installation Guide28 pages

Specifications2 pages

Safety Guide2 pages

Questions and Answers:

J
Jonathan RamosSep 7, 2025
How to troubleshoot Kyocera Printer when it cannot feed originals?
- S
  Scott VasquezSep 7, 2025
  If your Kyocera printer is not feeding originals, make sure that when placing originals in the document processor, you align the original width guides securely before placing the originals. Also, check if the paper feed roller or the separation pad is dirty, and if so, wipe it with a moistened cloth. If the problem persists, contact your Service Representative to replace the paper feed roller and separation pad.
J
Johnny FosterAug 22, 2025
How to troubleshoot Kyocera Printer that will not print?
- F
  fostercharlesAug 22, 2025
  If your Kyocera printer is not printing, check the following: * Ensure the printer is plugged into an AC outlet. * Turn on the main power switch. * Make sure the printer cable is securely connected. * If the printer cable was connected before powering on the machine, power on the machine after connecting the cable. * Check if the print job is paused, and if so, press [Resume].
P
Phyllis McdanielSep 4, 2025
How to fix 'Close Document Processor' message on Kyocera Printer?
- B
  Brenda JonesSep 4, 2025
  If your Kyocera printer displays 'Close Document Processor,' ensure the document processor is fully closed. Also, check if the left cover of the document processor is open and close it.
D
Darlene ScottSep 3, 2025
What to do if my Kyocera Printer doesn't copy when pressing Start?
- D
  Dylan McdanielSep 3, 2025
  If pressing the Start key on your Kyocera printer does not produce copies, check if there is a message on the Message Display and respond accordingly. Also, check if the machine is in Sleep mode; if so, press the Power key to recover it, and it will be ready to copy within 15 seconds.
L
lesliefranklinSep 2, 2025
How to adjust the print darkness on my Kyocera Printer?
- R
  Ryan SerranoSep 2, 2025
  If your Kyocera printer's printouts are too dark, set the correct density level for auto density if the machine is in Auto Density mode, or select the correct density level if the machine is in Manual Density mode.
P
Patrick WhitakerAug 31, 2025
What to do if my Kyocera Printer says 'Close front cover'?
- C
  christopher64Aug 31, 2025
  If your Kyocera printer displays 'Close front cover', check for any open covers and close the cover indicated on the operation panel.
C
Connie EllisAug 30, 2025
Why are the printouts from my Kyocera Printer dirty?
- L
  Lisa BaldwinAug 30, 2025
  If your Kyocera printer's printouts are dirty, clean the platen or the document processor. If the machine is being used in very humid conditions, refresh the drum.
D
Daniel PattersonAug 29, 2025
How to fix light printouts on my Kyocera Printer?
- K
  Kathleen HallAug 29, 2025
  If your Kyocera printer's printouts are too light, check the following: * If the machine is in Manual Density mode, select the correct density level. * Shake the toner container from side to side several times to distribute the toner evenly. * If there is a message indicating the addition of toner, replace the toner container. * If the paper is damp, replace it with new paper. * If EcoPrint mode is enabled, disable it.
P
perkinssarahAug 27, 2025
What to do if the Kyocera Printer waste toner box is full?
- V
  valerie44Aug 27, 2025
  If your Kyocera printer displays 'Waste toner box is full,' you need to replace the waste toner box.
K
Katherine HarrellAug 26, 2025
Why won't the operation panel of my Kyocera Printer turn on?
- W
  William LongAug 27, 2025
  If your Kyocera printer operation panel does not respond when the main power switch is turned on, ensure the power cord is plugged into an AC outlet.

Kyocera FS-3040MFP Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	23 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	999 copies
Total input capacity	600 sheets
Total output capacity	500 sheets
Maximum input capacity	2100 sheets
Multi-Purpose tray input capacity	100 sheets
Display	LCD
Product color	Black, Grey
Market positioning	Business
Display number of lines	5 lines
Internal memory	256 MB
Maximum print size	216 x 297 mm
Paper tray media types	Bond paper, Envelopes, High resolution paper, Labels, Photo paper, Recycled paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Power requirements	120 - 240V
Networking features	Fast Ethernet
All-in-one functions	Copy, Scan
Compatible operating systems	Windows 7/2000/XP/2003/Vista/2008\\r Mac OS 10.x\\r Sun OS4.1.x; Solaris 2.x
Mobile printing technologies	-
Supported network protocols (IPv4)	TCP/IP, IPX/SPX, AppleTalk, NetBEUI
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	1
Power consumption (average operating)	440 W
Scan to	E-mail, FTP, USB
Grayscale levels	256
Image formats supported	JPG, TIF
Document formats supported	PDF
Maximum duty cycle	200000 pages per month
Fax memory	256 pages
Modem speed	33.6 Kbit/s
Fax transmission speed	3 sec/page
Sustainability certificates	ENERGY STAR