EasyManuals Logo

Kyocera FS-4200DN User Manual

Kyocera FS-4200DN
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
Operation Panel
4-58
Bonjour (Bonjour setting)
Bonjour, also known as zero-configuration networking, is a service that automatically detects computers, devices and
services on an IP network.
Bonjour, because an industry-standard IP protocol is used, allows devices to automatically recognize each other without an
IP address being specified or DNS server being set.
Bonjour also sends and receives network packets by UDP port 5353. If a firewall is enabled, the user must check that UDP
port 5353 is left open so that Bonjour will run correctly. Some firewalls are set up so as to reject only certain Bonjour packets.
If Bonjour does not run stably, check the firewall settings and ensure that Bonjour is registered on the exceptions list and
that Bonjour packets are accepted. If you install Bonjour on Windows XP Service Pack 2 or later, the Windows firewall will
be set up correctly for Bonjour.
1 In the IPv4 Setting menu, press U or V to select Bonjour.
2 Press [OK]. The Bonjour screen appears.
3 Press U or V to select whether automatic detection is enabled.
4 Press [OK]. The automatic detection setting is set and the IPv4
Setting menu reappears.
IPv6 Setting (TCP/IP IPv6 settings)
This selects the settings for TCP/IP (IPv6).
TCP/IP (IPv6) is based on the current Internet protocol, TCP/IP (IPv4). IPv6 is the next-generation Internet protocol and
expands the available address space, which resolves the problem of the lack of addresses under IPv4, while also
introducing other improvements such as additional security functionality and the capacity to prioritize data transmission.
1 In the TCP/IP Settings menu, press U or V to select IPv6
Setting.
2 Press [OK]. The IPv6 Setting menu screen appears.
The options available in the TCP/IP (IPv6) settings are as follows:
TCP/IP (IPv6) (Enable/disable TCP/IP (IPv6))...4-59
RA (Stateless) (RA (Stateless) setting)...4-59
DHCPv6 (DHCPv6 setting)...4-59
IMPORTANT The RA (Stateless) and DHCPv6 menu options for TCP/
IP (IPv6) are displayed when TCP/IP (IPv6) is enabled.
Bonjour:
a
b
1
Off
********************-
IPv6 Setting:
a
b
********************-
[ Exit ]

Table of Contents

Other manuals for Kyocera FS-4200DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-4200DN and is the answer not in the manual?

Kyocera FS-4200DN Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Time to first page (black, normal)9 s
Print speed (black, normal quality, A4/US Letter)50 ppm
Printing colorsBlack
Maximum duty cycle250000 pages per month
Number of print cartridges1
Page description languagesEpson LQ, IBM ProPrinter XL24E, Microsoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3
Total input capacity600 sheets
Total output capacity- sheets
Maximum input capacity2600 sheets
Total number of input trays2
Multi-Purpose tray input capacity100 sheets
Custom media width70 - 216 mm
Maximum print size216 x 356 mm
Custom media length148 - 356 mm
Paper tray media typesPlain paper
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Mobile printing technologies-
Standard interfacesEthernet, USB 2.0
Optional connectivityEthernet, Parallel, Wireless LAN
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Processor model465
Processor familyPowerPC
Compatible memory cardsSD, SDHC
Maximum internal memory1280 MB
Sound power level (standby)27.3 dB
Sound pressure level (printing)54.4 dB
DisplayLCD
CertificationTÜV/GS, CE
Product colorBlack, White
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)12.8 W
Power consumption (printing)677 W
Power consumption (PowerSave)1.6 W
Sustainability certificatesBlue Angel, ENERGY STAR
Mac operating systems supportedMac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Weight and Dimensions IconWeight and Dimensions
Depth416 mm
Width380 mm
Height320 mm

Related product manuals