A-11
Appendix
USB Memory
USB memory is a type of simple, highly portable flash memory that plugs
into the USB memory slot. Files stored in USB memory can be printed by
plugging the USB memory into the printer and then specifying the desired
file names from the operation panel.
The operation panel displays the names of PDF, TIFF, JPEG and XPS
files.
Up to 1,000 files can be printed from USB memory. Files with names
consisting of up to 255 single-byte alphanumeric characters can be
printed.
Any double-byte characters included in a file name appear as corrupted
text in the message list. Also, when the file is printed an error message
appears and printing fails.
For information on printing PDF files stored in USB memory, refer to USB
Memory (USB memory selection) on page 4-17.
For information on supported USB memory devices, contact your service
technician.
PT-320 Faceup Output Tray (for FS-4100DN/FS-4200DN/FS-4300DN)
Use the faceup output tray when you wish paper to be stacked with the printed side facing up (reverse order).
To install the faceup output tray, perform the following procedures:
1 Install the paper stopper according to the size of paper to be used.
2 Install the faceup output tray on the rear of the printer.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
