11
6
Adjust the position of the paper stopper
to the paper size you are going to use,
pulling up the release lever located on
the back of the paper stopper.
7
Make sure that the edges of the paper
are aligned. Slide the paper into the
paper cassette.
• Make sure that the paper you
set fits below the load limit
marks (
VV
VVVV
VV) on the right and
left side paper guides.
• The paper cassette will hold
approximately 250 sheets of
paper with a 80 g/m² (21 lb.)
basis weight, or with a thick-
ness of 0.11 mm.
8
Put the cassette cover.
Release Lever
Paper
Stopper
Load Limit Marks
To Next Page
Loading...
