16
2
When the message display shows
Please wait, release the (17(5 key.
3
The message display indication
changes to that shown on the left and ?
flashes.
4
Press the
▲
or
▼
key repeatedly until
the message display shows the desired
language and then press the (17(5
key.
If you do not wish to change the set-
ting, press the &$1&(/ key.
5
The 5($'< indicator on the operator
panel lights and the printer gets ready
to print.
Printing a Status Page
To test the printer, print a status page indicating factory settings.
1
Press the 0(18 key on the operator
panel.
2
Press the
▲
or
▼
key repeatedly until
the message display shows
Print Status Page.
3
Press the (17(5 key twice. The mes-
sage display indicates Processing
during printing of the status page, then
returns to Ready.
If the status page prints correctly,
printer setup is complete. For details
on using the printer, refer to the Oper-
ation Guide contained as a PDF file in
the CD-ROM supplied with the
printer.
Please wait
MSG language
? English
STEP
8
To Next Page
Loading...
