Kyocera FS-6020 Installation Guide

Caution
NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION.
Notice on Software
SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER’S EMULATION MODE. The
printer is factory-set to emulate the HP PCL 6. The emulation mode can be changed by following the procedures
described in the Operation Guide contained as an electronic file in the CD-ROM supplied with the printer.
Notice
The information in this manual is subject to change without notification. Additional pages may be inserted in
future editions. The user is asked to excuse any technical inaccuracies or typographical errors in the present
edition.
No responsibility is assumed if accidents occur while the user is following the instructions in this manual. No
responsibility is assumed for defects in the printer’s firmware (contents of its read-only memory).
This manual, any copyrightable subject matter sold or provided with or in connection with the sale of the page
printer, are protected by copyright. All rights are reserved. Copying or other reproduction of all or part of this
manual, any copyrightable subject matter without the prior written consent of Kyocera Mita Corporation is pro-
hibited. Any copies made of all or part of this manual, any copyrightable subject must contain the same copy-
right notice as the material from which the copying is done.
Table of Contents
STEP 1 Unpacking.........................................................................1
STEP 2 Positioning the Printer .....................................................2
STEP 3 Installing the Toner Container .........................................3
STEP 4 Connecting the Printer to the Computer.........................6
STEP 5 Connecting to Power........................................................8
STEP 6 Adding Paper to the Paper Cassette and MP Tray .........9
STEP 7 Turning Power On...........................................................15
STEP 8 Printing a Status Page....................................................16
©2002 by KYOCERA MITA CORPORATION. All rights reserved
Revision 1.0 October 2002

Kyocera FS-6020 Specifications

General

Color	No
Print technology	Laser
Time to first page (black, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
I/O ports	USB
Power requirements	220/240V, 50/60 Hz.
Standard media sizes	A3, B4, A4, B5, A5, Letter, Legal, Ledger.
Power consumption (active)	422 W
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Internal memory	16 MB
Processor model	PowerPC405
Built-in processor	Yes
Maximum internal memory	144 MB
Sound power level (standby)	38 dB
Sound pressure level (printing)	51 dB
Total input capacity	250 sheets
Paper tray 2 input capacity	100 sheets
Maximum duty cycle	65000 pages per month
Power consumption (off)	126 W
Power consumption (printing)	893 W
Power consumption (PowerSave)	9.4 W

Weight and Dimensions

Dimensions (WxDxH)	467 x 410 x 310 mm