3
Installing the Toner Container
Before you can use the printer for the first time, you must set up the printer by installing
the toner container and the interfacing with the computer.
1
Open the printer top cover all the way.
2
Confirm that the lock lever is in the
release (UNLOCK) position. If not, pull it
forward until it is in the release posi-
tion.
3
Take the toner container from the bag.
4
Thoroughly shake the toner container
(in the direction of the arrow) ten times
or more to loosen and mix the toner
inside.
5
Carefully remove the protective seal.
STEP
3
To p C ove r
Toner Container
10 times or
more
Protective Seal
To Next Page
Loading...
