13
3
Adjust the position of the paper guides
on the MP tray. Standard paper sizes
are attached to the MP tray. For stan-
dard paper sizes, slide the guides to the
position marked correspondingly.
4
Align the paper with the paper guides
and insert as far as it will go.
Make sure that the paper you
set fits below the load limit
marks on the right and left side
paper guides.
If the paper is considerably curled in one direction, for example, if the
paper is already printed on one side, try to roll the paper in the opposite
direction to counteract the curl. Printed sheets will then come out flat.
Correct
CorrectCorrect
Correct
Incorrect
IncorrectIncorrect
Incorrect
Paper Guides
Load Limit Marks
To Next Page
Loading...
