20
Troubleshooting
"X" indicates the parts of the messages that appear differently depending on a specific
situation, such as the paper sizes or types, tray names, or toner colors.
ADF JAM Open ADF
Cover and Clear Jam
BPTray Print Job
SizeMismatch?Y/N
BPTray Print Job
TypeMismatch?Y/N
Bypass Tray Paper
Empty
Cancel Print JOB
I/O TimeOut
•
Remove jammed originals, and then
place them again. See "Removing
from the ADF" on page 29.
• Check the originals are suitable
for scanning. See "Placing
Originals",
User Guide
in the CD-
ROM.
Press the [B&W Start] key or
[Color Start] key to begin printing,
or press the [Clear/Stop] key to
cancel the job.
Press the [B&W Start] key or
[Color Start] key to begin printing,
or press the [Clear/Stop] key to
cancel the job.
Load paper to the bypass tray.
See "Loading Paper in the Bypass
Tray",
User Guide
in the CD-ROM.
If [I/O Timeout] is set to 15
seconds, increase the time period.
For details, see "Machine
Settings",
User Guide
in the CD-
ROM.
An original has
been jammed
inside the ADF.
The paper size set
for the document
differs from the
size of the paper
in the tray.
The paper type set
for the document
differs from the
type of the paper
in the tray.
The bypass tray
has run out of
paper.
The timeout period
set in [I/O Timeout]
expires when printing
is frequently
interrupted by data
from other ports, or
when printing data is
large and takes time
for processing.
Error and Status Messages on the Screen
Message
(alphabetical order)
SolutionsCauses
To Next Page
Loading...
