Kyocera FS-C1020MFP

2525
Removing Paper Jams
• Jammed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
• Toner on prints made immediately after clearing a paper jam may be insufficiently fused and can
smudge. Make test prints until smudges no longer appear.
• Do not forcefully remove jammed paper, as it may tear. Torn pieces remaining inside the
machine will cause further jams and possibly damage the machine.
If a paper jam occurs, paper may be jammed inside the machine or in the ADF. If paper
is jammed inside the machine, check the following positions, in the indicated order, to
locate the jammed paper.
1. Fusing Unit
If paper is jammed in the fusing unit, see
"Removing from the Fusing Unit" on page 26.
2. Tray
If paper is jammed in the tray, see
"Removing from the Tray" on page 27.
3. Transfer Unit
If paper is jammed in the transfer unit, see
"Removing from the Transfer Unit" on page 28.
ADF
If paper is jammed in the ADF, see "Removing
from the ADF" on page 29.
Paper Jam Positions