Top Page > Guide to the Machine > Feature Highlights > Using the Machine as a Scanner > Sending scanned files via e-mail
Sending scanned files via e-mail
You can send scanned files via e-mail using the control panel.
Preparation for sending scanned files via e-mail
1. Connect the machine to the network.
For details, see
Connecting with Network Cable .
2. Configure the IP address, subnet mask, and gateway address using the control panel.
For details, see
Configuring the IP Address Settings .
3. Configure the DNS and SMTP settings using Web Browser.
For details, see
Configuring the DNS Settings and Configuring the SMTP Settings .
4. Register the destinations to the Address Book using Web Browser.
For details, see
Registering Scan Destinations .
Top Previous Next
Copyright © 2009
Contents Previous Next Settings
To Next Page
Loading...
