Top Page > Guide to the Machine > Feature Highlights > Using the Machine as a Scanner > Sending scanned files to an FTP server
Sending scanned files to an FTP server
You can send scanned files to an FTP server using the control panel.
Preparation for sending scanned files to an FTP server
1. Connect the machine to the network.
For details, see
Connecting with Network Cable .
2. Configure the IP address, subnet mask, and gateway address using the control panel.
For details, see
Configuring the IP Address Settings .
3. Register the destinations to the Address Book using Web Browser.
For details, see
Registering Scan Destinations .
Top Previous Next
Copyright © 2009
Contents Previous Next Settings
To Next Page
Loading...
