How to fix skewed images on Kyocera KM-4050?
If the images from your Kyocera All in One Printer are skewed, check the following: * When placing originals on the platen, align them with the original size indicator plates. * When using the optional document processor, align the original width guides securely before placing the originals. * Check the position of the paper width guides to ensure the paper is loaded correctly.
Why can't my Kyocera KM-4050 All in One Printer receive documents?
There are several reasons why your Kyocera All in One Printer might not be able to receive a document: * The modular cord may not be connected correctly. Connect it correctly. * A communication error may be occurring. Remedy the cause of the error and ask the sender to retry. * The RX (reception) restriction may be activated. Cancel the RX restriction.
What to do if Kyocera All in One Printer FAX box limit exceeded?
The FAX Box capacity is full with document data. Press [OK]. The job is canceled. To resolve this, try the job again after printing or deleting the data in the FAX Box.
What does scanner memory full mean on Kyocera KM-4050?
Scanning cannot be performed on your Kyocera All in One Printer due to insufficient memory of scanner. Job is canceled. Press [End].
Why is my Kyocera KM-4050 ejecting blank sheets?
If your Kyocera All in One Printer is ejecting blank sheets, check the following: * When placing originals on the platen, ensure they are face-down and aligned with the original size indicator plates. * When using the optional document processor, ensure the originals are placed face-up.
What does hard disk error mean on Kyocera All in One Printer?
An error has occurred on the hard disk of your Kyocera All in One Printer. The possible error codes and their descriptions are as follows: * 01: Initialization error. Initialize the hard disk. * 04: Insufficient space on the hard disk to complete this operation. Move or delete data stored on the hard disk to increase available space.
Why can't I use the remote switching function on my Kyocera KM-4050 All in One Printer?
This can happen for a couple of reasons: * A pulse line might be in use. Some phones may transmit tone signals using buttons. Refer to the operation manual of your phone set. * The remote switching number might not be correct. Check the registration. (Default: 55)
What to do if Kyocera KM-4050 All in One Printer cannot perform encrypted communication?
Double-check the registrations both at sender and recipient to ensure they are correct.
What does memory card error mean on Kyocera All in One Printer?
An error has occurred on the memory card of your Kyocera All in One Printer. The possible error codes and their descriptions are as follows: * 01: Format error. Format the memory card again. * 04: Insufficient space on the memory card to complete this operation. Move or delete data stored on the memory card to increase available space.
Why can't my Kyocera KM-4050 All in One Printer perform memory forwarding?
This issue occurs if memory forwarding is not set to [On]. Check the memory forwarding setting.
General| Print technology | Laser |
|---|---|
| Time to first page (black, normal) | 3.5 s |
| Print speed (black, normal quality, A4/US Letter) | 40 ppm |
| Maximum copy resolution | 600 x 600 DPI |
| Copy speed (black, normal quality, A4) | 40 cpm |
| Faxing | Mono faxing |
| Fax memory | 120 MB |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Multi-Purpose tray | Yes |
| Total input capacity | 1000 sheets |
| Total output capacity | 250 sheets |
| Maximum input capacity | 4200 sheets |
| Multi-Purpose tray input capacity | 200 sheets |
| Internal memory | 512 MB |
| Processor model | 750FL |
| Processor family | PowerPC |
| Sound power level (standby) | 52 dB |
| Sound pressure level (printing) | 69 dB |
| Font styles | 80 outline fonts (PCL6), 136 PostScript KPDL 3 fonts, 1 bitmap font, 45 types of one-dimensional barcodes plus two-dimensional barcode (PDF-417) |
| Dimensions (WxDxH) | 599 x 646 x 745 mm |
| Power requirements | AC 220 - 240 V, 50/60 Hz |
| All-in-one functions | Copy, Fax, Scan |
| Maximum internal memory | 1 GB |
| Color all-in-one functions | scan, n |
| Power consumption (standby) | 230 W |
| Power consumption (PowerSave) | 17 W |
| Power consumption (average operating) | 1010 W |
| Certification | TÜV/GS, CE, ISO 15408 |
| Market positioning | Business |
Basic procedure for sending faxes using the keypad.
How to set up and manage automatic reception of incoming faxes.
Instructions for registering and managing fax destinations in the address book.
How to schedule fax transmissions for a later time.
Sending the same originals to multiple destinations in one operation.
How to forward received faxes to other destinations.
Managing received faxes by storing them in personal FAX Boxes.
User and job accounting features for managing machine usage.
How to view the history of sent and received faxes.
How to set up the machine to handle both telephone and fax calls.
Integrates the machine with an answering machine for call handling.
Setting rules to limit who the machine can communicate with.
To Next Page
