To Next Page
D
Debra CraneSep 2, 2025
Why is there no print output after reception on my Kyocera All in One Printer?
- JJordan ValentineSep 2, 2025
This can occur if memory forwarding is activated. Check the forwarding destination.
Why is there no print output after reception on my Kyocera All in One Printer?
This can occur if memory forwarding is activated. Check the forwarding destination.
What to do if Kyocera KM-4050 All in One Printer cannot use sub address relay broadcast communication?
This problem arises when there isn't enough free space available in the memory. To resolve this, free up some space in memory and then send, or simply make some free space in memory.
Why can't my Kyocera KM-4050 perform memory forwarding using a sub address?
This issue can occur for the following reasons: * The recipient fax machine may not be equipped with a sub address transmission feature. Sub address transmission cannot be performed unless the recipient fax machine has a similar sub address transmission feature. * The entered sub address may not be identical to the sub address registered in the recipient fax machine. If your entry is correct, check with the recipient. This machine does not use a sub address password for reception.
Why can't my Kyocera KM-4050 All in One Printer perform memory forwarding?
This issue occurs if memory forwarding is not set to [On]. Check the memory forwarding setting.
Why can't my Kyocera All in One Printer perform sub address transmission?
There are several possible reasons: * The recipient fax machine may not be equipped with a sub address transmission feature. Sub address transmission cannot be performed unless the recipient fax machine has a similar sub address transmission feature. * The entered sub address or sub address password may not be identical to the sub address or sub address password registered in the recipient fax machine. If your entry is correct, check with the recipient. This machine does not use a sub address password for reception. * There may not be free space available in the memory of the recipient fax machine. Check with the recipient.
Why can't my Kyocera KM-4050 store memory forwarding data in a FAX Box?
There are two possible causes: * The FAX Box may not be specified correctly. Check the memory forwarding setting. * There may not be enough free space available in the memory. Receive after the memory has free space, or create free space in the memory.
What to do if scheduled sending jobs exceeded on Kyocera KM-4050 All in One Printer?
The number of jobs has exceeded the limit set for delayed transmission. Press [OK]. The job is canceled. Wait until the delayed transmission is executed, or cancel the delayed transmission and then perform the job again.
What to do if Kyocera All in One Printer job accounting restriction exceeded?
The number of papers used has exceeded the limit preset by Job Accounting, and no further operation is possible. Press [OK]. The job is canceled. Try the job again after resetting the limit for paper use.
What to do if Kyocera All in One Printer cannot perform broadcast transmission?
This issue occurs when there isn't enough free space available in the memory. To resolve this, send after the memory has free space, or create free space in the memory.
What to do if Kyocera KM-4050 cannot perform memory reception?
To resolve the issue, receive after the memory has free space, or create free space in the memory.
General| Print technology | Laser |
|---|---|
| Time to first page (black, normal) | 3.5 s |
| Print speed (black, normal quality, A4/US Letter) | 40 ppm |
| Maximum copy resolution | 600 x 600 DPI |
| Copy speed (black, normal quality, A4) | 40 cpm |
| Faxing | Mono faxing |
| Fax memory | 120 MB |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Multi-Purpose tray | Yes |
| Total input capacity | 1000 sheets |
| Total output capacity | 250 sheets |
| Maximum input capacity | 4200 sheets |
| Multi-Purpose tray input capacity | 200 sheets |
| Internal memory | 512 MB |
| Processor model | 750FL |
| Processor family | PowerPC |
| Sound power level (standby) | 52 dB |
| Sound pressure level (printing) | 69 dB |
| Font styles | 80 outline fonts (PCL6), 136 PostScript KPDL 3 fonts, 1 bitmap font, 45 types of one-dimensional barcodes plus two-dimensional barcode (PDF-417) |
| Dimensions (WxDxH) | 599 x 646 x 745 mm |
| Power requirements | AC 220 - 240 V, 50/60 Hz |
| All-in-one functions | Copy, Fax, Scan |
| Maximum internal memory | 1 GB |
| Color all-in-one functions | scan, n |
| Power consumption (standby) | 230 W |
| Power consumption (PowerSave) | 17 W |
| Power consumption (average operating) | 1010 W |
| Certification | TÜV/GS, CE, ISO 15408 |
| Market positioning | Business |
Basic procedure for sending faxes using the keypad.
How to set up and manage automatic reception of incoming faxes.
Instructions for registering and managing fax destinations in the address book.
How to schedule fax transmissions for a later time.
Sending the same originals to multiple destinations in one operation.
How to forward received faxes to other destinations.
Managing received faxes by storing them in personal FAX Boxes.
User and job accounting features for managing machine usage.
How to view the history of sent and received faxes.
How to set up the machine to handle both telephone and fax calls.
Integrates the machine with an answering machine for call handling.
Setting rules to limit who the machine can communicate with.
