How to fix skewed images on Kyocera All in One Printer?
If the images from your Kyocera All in One Printer are skewed, check the following: * When placing originals on the platen, align them with the original size indicator plates. * When using the optional document processor, align the original width guides securely before placing the originals. * Check the position of the paper width guides to ensure the paper is loaded correctly.
Why can't my Kyocera KM-3050 All in One Printer receive documents?
There are several reasons why your Kyocera All in One Printer might not be able to receive a document: * The modular cord may not be connected correctly. Connect it correctly. * A communication error may be occurring. Remedy the cause of the error and ask the sender to retry. * The RX (reception) restriction may be activated. Cancel the RX restriction.
What to do if Kyocera KM-3050 All in One Printer FAX box limit exceeded?
The FAX Box capacity is full with document data. Press [OK]. The job is canceled. To resolve this, try the job again after printing or deleting the data in the FAX Box.
What to do if Kyocera KM-3050 cannot perform memory reception?
To resolve the issue, receive after the memory has free space, or create free space in the memory.
Why is my Kyocera KM-3050 All in One Printer ejecting blank sheets?
If your Kyocera All in One Printer is ejecting blank sheets, check the following: * When placing originals on the platen, ensure they are face-down and aligned with the original size indicator plates. * When using the optional document processor, ensure the originals are placed face-up.
Why can't I use the remote switching function on my Kyocera KM-3050?
This can happen for a couple of reasons: * A pulse line might be in use. Some phones may transmit tone signals using buttons. Refer to the operation manual of your phone set. * The remote switching number might not be correct. Check the registration. (Default: 55)
What to do if Kyocera KM-3050 All in One Printer cannot perform encrypted communication?
Double-check the registrations both at sender and recipient to ensure they are correct.
What to do if Kyocera All in One Printer cannot use sub address relay broadcast communication?
This problem arises when there isn't enough free space available in the memory. To resolve this, free up some space in memory and then send, or simply make some free space in memory.
Why can't my Kyocera All in One Printer perform memory forwarding?
This issue occurs if memory forwarding is not set to [On]. Check the memory forwarding setting.
Why can't my Kyocera KM-3050 perform memory forwarding using a sub address?
This issue can occur for the following reasons: * The recipient fax machine may not be equipped with a sub address transmission feature. Sub address transmission cannot be performed unless the recipient fax machine has a similar sub address transmission feature. * The entered sub address may not be identical to the sub address registered in the recipient fax machine. If your entry is correct, check with the recipient. This machine does not use a sub address password for reception.
Power| voltage | 120V |
|---|---|
| frequency | 60Hz |
| current | 11.5A |
System Memory| standard RAM | 512MB |
|---|---|
| maximum RAM | 1GB |
| hard drive capacity | 80GB |
Output Speeds| warm-up time | Within 30 Seconds |
|---|---|
| first copy out time | 3.9 Seconds |
| pages per minute (letter) | 30 |
Weight and Dimensions| width | 23.6" |
|---|---|
| depth | 25.4" |
| height | 29.3" |
| weight | 188 lbs |
Explains basic fax sending using keys and automatic reception.
Provides methods to cancel transmissions and redial numbers.
Details delayed, broadcast, interrupt send, chain dial, and manual operations.
Covers manual reception, remote switch, memory forwarding, and FAX boxes.
Explains sub address, polling, account management, and program dial features.
Explains i-FAX and details necessary SMTP/POP3 server configuration via Command Center.
Guides on sending and receiving faxes over the Internet.
Lists common error messages and provides a guide to resolve operational problems.
To Next Page
