Kyocera KM-3050

Setup and Registration
6-22 OPERATION GUIDE
2
Press [FAX/i-FAX], [Next] of TX/RX Restriction and then [Register/Edit] of
Permit ID List.
3
Press [Add].
4
Use [+]/[-] or the
numeric keys to
enter Permit ID No.
(0000 to 9999)
NOTE: Press the Clear key to display the previous number.
5
Press [OK].
6
To register other Permit ID numbers, repeat steps 3 to 5.
7
Press [Close].
8
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Changing and Deleting Permit ID No.
1
Follow steps 1 to 2 of Registering Permit ID No. on page 6-21.
Status
FAX - Permit ID List
10/10/2007 10:00
FAX ID
Register an ID from which faxes will be accepted. (Up to 25 IDs can be regist ered.)
Add
Detail Delete
Close
1/1
Status
FAX - Add
Add or edit a Permit ID for transmissions.
Use [-]/[+] or the numeric keys to enter a number.
Cancel OK
10/10/2007 10:00
(0000 -9999 )
2222