Kyocera KM-3050

Setup and Registration
OPERATION GUIDE 6-19
6
2
Select the Permit
FAX No. to be
changed or deleted.
To change Permit
FAX No., go to step
3, and to delete
Permit FAX No., go
to step 6.
3
Press [Detail].
4
Use the numeric
keys to reenter
Permit FAX No. Up
to 20 digits can be
entered.
NOTE: Press [Pause] to insert a pause (-) between numbers.
Press [Space] to enter a space.
Use [W] or [X] to move the cursor.
Pressing [Back Space] deletes the character to the left of the cursor.
5
Press [OK]. When the change confirmation screen appears, press [Yes].
Go to step 7.
6
Press [Delete]. When the deletion confirmation screen appears, press
[Yes].
7
To change or delete other Permit FAX numbers, repeat steps 2 to 6.
8
Press [Close].
9
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Registering Reject FAX No.
NOTE: Up to 50 Reject FAX numbers can be registered.
1
Press the System Menu key.
Status
FAX - Permit No. List
10/10/2007 10:00
TEL Number
Register a number from which faxes will be accepted. (Up to 50 numbers can be r egis tered .)
Add
Detail Delete
12345678
1/1
Close
Status
FAX/i-FAX - Permit No.
Regis ter or edit perm it num ber.
Use the numeric keys to enter a number.
Cancel OK
10/10/2007 10:00
123456789
Back SpaceSpacePause