Kyocera KM-3050 User Manual

Setup and Registration
6-28 OPERATION GUIDE
6
Press [OK]. To register other encryption keys, repeat steps 3 to 6.
7
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Changing and Deleting Registration Contents of Encryption Key
1
Follow steps 1 to 2 of Registering an Encryption Key on page 6-27.
2
Select the encryption
key to be changed or
deleted. To change
the registration
contents, go to step
3, and to delete the
registration
contents, go to step
7.
3
Press [Register/Edit].
4
Press [Encryption Key].
5
Press [Backspace] to delete the encryption key last entered. Use the
numbers (0 to 9) and the alphabet (A to F) on the touch panel, enter the
encryption key (16 digits), and press [OK].
6
Press [OK]. When the change confirmation screen appears, press [Yes].
Go to step 8.
7
Press [Delete]. When the deletion confirmation screen appears, press
[Yes].
8
To change or delete other encryption keys, follow steps 2 to 7.
9
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Operation at the Sending System
When sending originals by encrypted transmission, use the Address Book
registered for encryption or set encrypted transmission when dialing
directly using the numeric keys.
NOTE: Encrypted transmission can be also used in broadcast
transmission.
With encryption communication, you cannot conduct sub address
communication.
Status
FAX - Encrypt . Key Regist rat ion
10/10/2007 10:00
Encrypt ion K ey
Register a key to use for encrypted FAX transmissions. (Up to 20 keys can be regis tered.)
Register
/Edit
Delet e
1/4
Key02
Key01
Key03
Key04
Key05
Close

Kyocera KM-3050 Specifications

Power

voltage	120V
frequency	60Hz
current	11.5A

System Memory

standard RAM	512MB
maximum RAM	1GB
hard drive capacity	80GB

Output Speeds

warm-up time	Within 30 Seconds
first copy out time	3.9 Seconds
pages per minute (letter)	30

Weight and Dimensions

width	23.6"
depth	25.4"
height	29.3"
weight	188 lbs