Setup and Registration
OPERATION GUIDE 6-29
6
1
Register the encryption key you have arranged with the receiving system.
(Refer to Registering an Encryption Key on page 6-27.) When an
encryption key has already been registered, go to the next step.
2
Press the Send/FAX key.
3
Place the originals.
4
Press [FAX No. Entry].
5
Use the numeric
keys to enter fax
number of the other
party, and press
[Encrypted
Transmission].
NOTE: When encrypted transmission has been set to a destination in the
Address Book or One-touch keys, you can use the destination.
6
Press [On] and
select the encryption
key number.
7
Press [OK] and go to step 10. When the selection of an encryption box is
required by the other party, press [Encryption Box] and go to the next step.
NOTE: When the machine receives originals, the encryption box is not
used.
Status
OK
10/10/2007 10:00
Sub Addres s
Transmission
Start Speed
ECM
Encrypted
Transmission
Cancel
Next Dest .Add to Addr Book
Add a new FAX dest ination.
Enter the FAX number with the numeric keys.
FAX No. Entry
Destination
On Hook
123456789
0
Ready to send.
Enter Destination.
SpacePause Back Space
Status
OK
10/10/2007 10:00
Off
Cancel
FAX No. Entry - Encrypted Transmission
Destination
On
Encryption Key No.
Not Use
Encrypt ion
Box
0
1/1
Key
Key
Ready to send.
Enter Destination.
01
02
To Next Page
Loading...
