Why is my Kyocera Copier producing blank copies?
If nothing appears on the copy from your Kyocera Copier, place the original face down on the platen and adjust the Original Size Indicator Plate to match its size. When using the optional Document Processor, place the original face up.
What to do if Kyocera Copier says 'MP tray empty. Add paper'?
If the Kyocera Copier indicates 'MP tray empty. Add paper,' place paper in the MP Tray. If the paper still fails to feed, try resetting the paper in the tray.
How to resolve 'Add paper in cassette #' message on Kyocera Copier?
If your Kyocera Copier displays 'Add paper in cassette #', load paper into the cassette indicated by the # symbol on the display.
Why is the 'Add Toner' indicator blinking on my Kyocera Copier?
If the 'Add Toner' indicator on your Kyocera Copier is blinking, it means the toner is low. Replace the toner container with a new one as soon as possible.
How to remove white spots from Kyocera Copier copies?
If white spots appear on copies from your Kyocera Copier, scrub the transfer rollers with a cleaning brush to clean them.
What to do if the Periodic Maintenance indicator lights up on Kyocera Copier?
Contact your service representative if the Periodic Maintenance indicator lights up on your Kyocera Copier.
Why is my Kyocera Copier making dark copies?
If the Kyocera Copier produces dark copies, perform the “Auto Exposure Adjustment” or use Exposure Adjustment to set the proper exposure. You can also perform the Manual Exposure Adjustment in each original mode.
Why are the copies skewed on my Kyocera Copier?
If copies from your Kyocera Copier are skewed, ensure the original is correctly set against the Original Size Indicator Plate on the platen or correctly aligned with the original insertion guide in the optional Document Processor. Also, check the position of the Width Guide in the cassette.
What to do if Kyocera Copier says 'Close document processor cover'?
If the Kyocera Copier displays 'Close document processor cover', close the left cover and then the front cover.
What to do if my Kyocera Copier says 'Memory is full. Press OK'?
If your Kyocera Copier displays 'Memory is full. Press OK,' press [OK] to start printing the copies. Alternatively, press [Reset] or [Stop/Clear] to delete the data. Try reducing the number of originals and repeat the copying procedure.
Identifies external components of the copier, including trays and covers.
Details the keys, buttons, and indicators on the copier's control panel.
Explains the status information and error codes shown on the operation panel.
Instructions for properly loading paper into the copier's cassettes and MP tray.
Step-by-step guide for performing a standard copy job from warm-up to completion.
Instructions for reducing or enlarging copy images using zoom ratios.
How to pause a current copy job to perform another task and resume.
Explains the energy-saving low power mode and how to activate it.
Describes the function that automatically turns the copier off after inactivity.
Guide to creating duplex copies from different original types.
Instructions for copying multiple originals onto separate sheets.
How to add a binding margin to copies for document binding.
Erasing blemishes from edges or book centers for cleaner output.
Combining multiple originals onto one output page.
How to collate multiple sets of copies automatically.
Using the EcoPrint function to reduce toner consumption.
Registering and recalling frequently used copy settings.
Overview of the copier's system menu and default settings.
Lists and describes available settings within the system menu.
Step-by-step guide to navigating and changing system settings.
How to modify the copier's default configuration and settings.
Viewing and printing copy counts and toner usage reports.
Managing copier usage via Department ID Codes.
How to operate the job accounting functions.
Adding new Department ID codes for tracking copier usage.
Removing unused Department ID codes.
Resetting the copy count for all departments.
Generating a report of copy usage by department.
Enabling or disabling the job accounting feature.
Performing copy operations when job accounting is active.
Details about the automatic document feeder and its capabilities.
Information on the optional multi-tray paper feeder.
Features of the optional unit for duplex copying.
Usage of the key counter for managing copier usage.
Installing the kit to use the copier as a printer.
Network printing capabilities with a print server.
Information on increasing the copier's memory capacity.
Procedures for cleaning various parts of the copier.
Steps for replacing toner and waste toner.
Common issues and their corrective procedures.
Error messages and corresponding solutions.
Guidance on clearing paper jams from different locations.
Technical specifications of the copier.
General| Print Technology | Laser |
|---|---|
| Type | Monochrome |
| Functions | Print, Copy, Scan |
| Print Speed | 20 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 20 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Max Paper Size | A3 |
| Interface | USB 2.0 |
| Memory | 32 MB |
To Next Page
