To Next Page
J
Jessica JacksonSep 12, 2025
How to improve copy clarity on Kyocera Copier?
- KKaitlin GoldenSep 12, 2025
If your Kyocera Copier is not producing clear copies, select the appropriate Image Quality Mode.
How to improve copy clarity on Kyocera Copier?
If your Kyocera Copier is not producing clear copies, select the appropriate Image Quality Mode.
Why are the copies skewed on my Kyocera Copier?
If copies from your Kyocera Copier are skewed, ensure the original is correctly set against the Original Size Indicator Plate on the platen or correctly aligned with the original insertion guide in the optional Document Processor. Also, check the position of the Width Guide in the cassette.
Why is my Kyocera Copier making dark copies?
If the Kyocera Copier produces dark copies, perform the “Auto Exposure Adjustment” or use Exposure Adjustment to set the proper exposure. You can also perform the Manual Exposure Adjustment in each original mode.
Why is my Kyocera Copier making light copies?
If the Kyocera Copier produces light copies, there are several possible causes and solutions: * If the copier is in Auto Exposure Mode, perform the “Auto Exposure Adjustment.” * If the copier is in Manual Exposure Mode, use Exposure Adjustment to set the proper exposure. * If the toner in the toner container is caked, shake the Toner Container left and right for approximately 10 times. * If the Add Toner Indicator is lit, replace the Toner Container. * If the paper is damp, replace the paper with new paper. * If the electrical charge section is dirty, open the front cover and use the Cleaning Rod to clean the electrical charge section.
How to use Kyocera Copier when Job Accounting is set?
If your Kyocera Copier is in Job Accounting mode, use the numeric keys to enter the assigned Section Code to perform copying. After copying, press [Job Accounting] to display “= = =” again.
How to fix 'Add toner' message on Kyocera Copier?
If the Kyocera Copier shows 'Add toner' message, replace the toner container with a new one.
What to do if Kyocera Copier displays 'Memory is full. Cannot continue'?
If the Kyocera Copier shows 'Memory is full. Cannot continue,' press [Stop/Clear], then press [Interrupt] again after the data is deleted to exit Interrupt Copying. Once the interrupted copy is complete, repeat the procedure.
How to resolve 'Close document processor' message on Kyocera Copier?
If the Kyocera Copier displays 'Close document processor', ensure that the Document Processor is completely closed.
What to do if Kyocera Copier says 'Close document processor cover'?
If the Kyocera Copier displays 'Close document processor cover', close the left cover and then the front cover.
How to fix 'Close front cover' error on Kyocera Copier?
If the Kyocera Copier displays 'Close front cover', ensure that the front cover is completely closed.
General| Print Technology | Laser |
|---|---|
| Type | Monochrome |
| Functions | Print, Copy, Scan |
| Print Speed | 20 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 20 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Max Paper Size | A3 |
| Interface | USB 2.0 |
| Memory | 32 MB |
Identifies external components of the copier, including trays and covers.
Details the keys, buttons, and indicators on the copier's control panel.
Explains the status information and error codes shown on the operation panel.
Instructions for properly loading paper into the copier's cassettes and MP tray.
Step-by-step guide for performing a standard copy job from warm-up to completion.
Instructions for reducing or enlarging copy images using zoom ratios.
How to pause a current copy job to perform another task and resume.
Explains the energy-saving low power mode and how to activate it.
Describes the function that automatically turns the copier off after inactivity.
Guide to creating duplex copies from different original types.
Instructions for copying multiple originals onto separate sheets.
How to add a binding margin to copies for document binding.
Erasing blemishes from edges or book centers for cleaner output.
Combining multiple originals onto one output page.
How to collate multiple sets of copies automatically.
Using the EcoPrint function to reduce toner consumption.
Registering and recalling frequently used copy settings.
Overview of the copier's system menu and default settings.
Lists and describes available settings within the system menu.
Step-by-step guide to navigating and changing system settings.
How to modify the copier's default configuration and settings.
Viewing and printing copy counts and toner usage reports.
Managing copier usage via Department ID Codes.
How to operate the job accounting functions.
Adding new Department ID codes for tracking copier usage.
Removing unused Department ID codes.
Resetting the copy count for all departments.
Generating a report of copy usage by department.
Enabling or disabling the job accounting feature.
Performing copy operations when job accounting is active.
Details about the automatic document feeder and its capabilities.
Information on the optional multi-tray paper feeder.
Features of the optional unit for duplex copying.
Usage of the key counter for managing copier usage.
Installing the kit to use the copier as a printer.
Network printing capabilities with a print server.
Information on increasing the copier's memory capacity.
Procedures for cleaning various parts of the copier.
Steps for replacing toner and waste toner.
Common issues and their corrective procedures.
Error messages and corresponding solutions.
Guidance on clearing paper jams from different locations.
Technical specifications of the copier.
