2FD/2FF/2FG
2-4-17
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Transfer/ Transfer roller unit Replace
400K (30)/500K (40/50)
Replace. (Clean when user call 1-6-35
separation occurs.)
section
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Developing Developing unit Replace
400K (30)/500K (40/50)
Replace. (Check and replace 1-6-34
section when user call occurs.)
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Main charging/ Drum unit Replace
400K (30)/500K (40/50)
Replace. (Check and replace 1-6-32
drum section when user call occurs.)
Main charger unit Clean
400K (30)/500K (40/50)
Clean with a wet cloth and then
a dry cloth.
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Fixing section Fixing unit Replace
400K (30)/500K (40/50)
Replace. 1-6-36
Press roller separation Check, replace
400K (30)/500K (40/50)
Clean with alcohol.
(Check and replace when user
call occurs.)
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Eject section Eject roller Clean
400K (30)/500K (40/50)
Clean with alcohol.*
Eject pulley Clean
400K (30)/500K (40/50)
Clean with alcohol.*
Switchback roller Clean
400K (30)/500K (40/50)
Clean with alcohol.*
Switchback pulley Clean
400K (30)/500K (40/50)
Clean with alcohol.*
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Covers Covers Clean Every service Clean with alcohol or a dry cloth.
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Other Image quality Check and adjust Every service
*Check and clean with alcohol when user call occurs.
To Next Page
Loading...
