Kyocera KM-6030

How to perform FTP transmission
This section explains how to scan an image using the FTP transmission function.
1
Press the [Scanner] key.
2
Press [Scan to FTP].
3
Select the sender (user). Press directly
the number key, or enter the user
number using the numeric keys and
press [Enter].
If the password is already entered with
the user registration, the password entry
screen is displayed. Enter the password
and press [Enter].
4
Press [Address book].
5
Use [S] and [T] to select the
transmission destination FTP server.
Press [Add dest.] to login to the FTP
server.
is displayed at the selected
transmission destination.
Select scanner function.
Database
Connection
Send
E-mail
Scan to
FTP
Scan to PC TWAIN
History
of sending
Edit
addr. book
01/0
Stop
a
me.
Enter
User number
(with #key)
Stop
Enter
Pas s word (Enter by #key )
Clear
Ready to scan.
Address
Select
send si ze
Scanning
resolution
Scan to FTP-Continuous TX
Select
orig.size
Ori g. set
direction
Sending to
Delete
Destination
Place the original and select destination.
Basi c
Qual i ty
Auto size 200dpi
Auto Back Edge
01/0
Original
11x17
"
book
Close
k
Address About
dest.
0
-9
YZ
OPR
GHI
Add
dest.
Up
Down
1
FTP02
FTP03
FTP04
FTP05
FTP01
Select:
When selecting FTP server for which
you select [NO] for Skip Authentication,
enter the user name and the password
using the procedure [Close].
User name:
1. Press [Change #] at User name.
2. Enter the user name.
3. Press [End].
Password:
1. Press [Change #] at Password.
2. Enter the password.
3. Press [End].
6
Press [Close].
7
Set up for scanning.
Note For scanning set up, refer to the Functions Edition of the Operation Guide (On-Line Manual).
8
Place the original and press the [Start]
key to start scanning.
When scanning is complete, the
machine uploads the scan data to the
transmission destination FTP server.
Error messages and corrective actions
Error messages that appear in FTP transmission and corrective actions are as below.
Use r Name & Passwor d
:
Back
:
Change #
Change #
User name
Password
to scan.
Address
Select
send size
Scanning
resolution
File type
Cancel
n
tinuo us TX
Select
orig.size
Ori g. se t
direction
File name
Sending to
Delete
i
ginal and select destination.
Basi c
Qual ity Edit
Auto size 200dpi
Auto Back Edge
TIF F
Auto
01/04/`05 11:30
Ori gi na l
------
Send
11x17"
book
Input
Now scanning originals.
Orig._Set_Direction
01/0
------
Scan to FTP
Orig. page
1 sided
Rear
User name: User A
Send
11x17"
SCAN0060_000.tif
1
Error
code
Error message Corrective action
E080 Unable to find FTP server.
Contact administrator.
Confirm that the network cable is properly connected.
Also contact the server administrator or appropriate
person to confirm that the FTP server is properly
operating.
E081 Unable to Log in to the FTP
Server
Login to the FTP server has failed. Check to see if the
user name and the password are properly registered.
E082 The Path attempted to use for
saving does not exist
The storage folder is not found or the path to the storage
folder is incorrect. Check that the storage folder in the
FTP server matches the path setting registered in the
machine.
E083 Error occurred at FTP Server
Please contact Administrator
Storage has failed with unexpected response from the
FTP server. Contact the server administrator or
appropriate person to confirm that writing is permitted to
the login user account.